AlcoSense Elite 3 Personal Breathalyzer
Designed for convenience
Fast BAC results
The AlcoSense Elite 3 breathalyser provides you with your BAC test results within 10 seconds of testing.
Accurate Fuel Cell Sensor
The Elite 3's fuel cell sensor provides readings up to 3 decimal places that are accurate to +/- 0.005%BAC
Handy Calibration Reminders
Stress less about calibrations - the Elite 3 will alert you when calibration is due (every 500 tests). We recommend calibrating every 6 months at a minimum.
Convenient and Portable
The Elite 3 features a space-saving, super lightweight and compact design. Plus, it comes with a hard zip pouch and 5 personal mouthpieces.
Australian Standards AS3547 Certified
Rigorously tested to Australian Standards AS3547 for accuracy, quality and durability.
The Elite 3's specially designed mouthpiece allows for a better, more comfortable holding angle and also helps to prevent moisture from entering the sensor. The breathalyser can be used with a mouthpiece for specific testing, or without a mouthpiece for fast mode testing.
Stylish Personal Breathalyser
The AlcoSense Elite 3's sleek and modern design makes it an elegant and professional breath alcohol tester for all users.
Drive with an informed decision with a quality product
With a powerful fuel cell sensor, accurate results and fast performance, the Elite 3 alcohol breath tester is a must-have device for everyone.
Backed by Andatech's Lifetime Guarantee
All Andatech personal breathalysers come with a standard 3 years manufacturer's warranty.
However, if you calibrate your breathalyser every 6 months from the date of purchase, we will continue to extend the manufacturer's warranty up to a lifetime as long as the calibrations are maintained.
|BAC Range||0.000% - 0.200%BAC|
|Sensor Type||FxCell2 Fuel Cell Sensor|
|Accuracy||±0.005%BAC at 0.050%BAC|
|Warm Up Time||3 seconds ~ 4 minutes|
|Response Time||Within 10 seconds at 0.10%BAC|
|Recycle Time||10 seconds|
|Working Temperature||5 – 40°C|
|Power Supply||2 x AAA Batteries (Alkaline Only)|
|Mouthpieces||5 mouthpieces supplied (please note this unit is only compatible with AlcoSense mouthpieces)|
|Result Reading||0.000% to 0.200%BAC|
|Certification||Australian Standard AS3547|
|Calibration Frequency||500 tests or every 6 months (whichever comes first)|
|Features||3 decimal place reading, flow control, auto power off, passive/fast mode|
|Includes||User manual, 5 mouthpieces, batteries, carry case|
|Product Weight||83g including batteries|
|Dimensions||H: 97.5mm, W: 53.8mm, D: 18mm|
|Warranty||3 years (up to a lifetime under the Andatech Guarantee)|
AlcoSense Elite 3 Breathalyser User Manual
AlcoSense Elite 3 Personal Breathalyser Fact Sheet
AlcoSense Elite 3 Breathalyzer
AlcoSense Elite 3 Personal Breathalyser
Get a Quote
Fill in the form below with your details and requirements, and someone from our team will get back to you shortly! Or, give us a call on 03 8899 6900 to speak with our friendly team :)
Customer ReviewsWrite a review
Think I already wrote a review, but just got an automated email asking for another review, so here it is again:
I was very excited about this purchase (email below), until I saw that this same product was sold on the dicksmith/appliances online websites for +20% cheaper!
This is causing me a bit of a buyer's remorse, and Customer Support couldn't do anything even though I've reached out via email already. Hence the negative review.
This is a very functional product. The controls aren't very user friendly, but it's easy enough if you use it often or have the manual handy. Sometimes the reading is inaccurate, so I need to take a couple of readings to get a consistent result. But it's a good product for the price.
Hi, i used the breathelizer and doesn’t show a figure only a letter……
Its a AlcoSense ELITE 3
Keeps showing F1o
Its not working as easy as it should.
Thank you for your feedback.
I believe you're having some difficulties with your unit showing 'FLO'. May I know if you continued to blow into the unit after you hear the beeping sound it makes?
One of the common mistake is stopping before the unit has enough breath sample. The beeping noise it produces is an indicator to keep blowing UNTIL you hear a double beep or feel a double click to stop.
If you stop blowing before the double beep, the unit will come up with 'FLO' which indicates that it does not have enough breath sample.
Please watch the video below on the steps of blowing into an Alcosense breathalyser:
Best thing I ever bought should’ve got one along time ago
We have been really struggling to make our unit work. Looking for a useful video to check we are doing it right. We are doing everything in the instructions but not getting a reading.
Got this as a birthday gift. I like that it is small and sleek. Easy to use and looks modern and stylish. The hard pouch is nice for storing mouthpieces and protecting the breathalyser.
I am very happy to have the elite 3 as it gives me very accurate reading and worth the cost.
And returning it is probably more trouble than it is worth.
Thank you for your feedback. We're sorry to hear that you're having issues with your unit.
I believe you've been in contact with us on 5/6/2019 and we've issued a return authorization on 6/5/2019 to have the unit returned for inspection.
We apologise for the inconvenience this have caused as we understand it is a hassle to return the unit. We hope to be able to quickly resolve this issue for you once we've received the unit.
Pleased with device but did have concerns until three discussions with help line on following matters:
- Users manual not sufficiently clear re opening of device to clear battery insulation for operation but discussion clarified.
- problem with airflow when using plastic mouthpiece found to be due to blocked airway due malformation of tube, after noting that OK without mouthpiece during discussion with helpline.
- although user manual referred to "click" I had taken beep as finalising operation and therefore was not getting reading but "OUT" on display. Operator clarified for me.
Now all OK and understood. Thanks